What is a outdoor mist cooling system?

Outdoor misting cooling system is used by most people in summer or when the weather is high. It is mainly liquid (usually water) left through the misting nozzle fog, misting nozzle misting liquid into very fine liquid particles, very fine water particles evaporate at high temperature, absorb the heat around, so as to achieve the effect of cooling around. misting cooling systems typically cause ambient temperatures to drop up to 25 degrees F.
People usually use it in outdoor places, such as homes, back yards, swimming pools, corridors, sun umbrellas, gardens, etc., to cool down. Outdoor misting systems generally have misting nozzles, durable pipes, clamps and so on. The installation of misting cooling system is very easy. The misting cooling system on the market is equipped with a handheld installation, but with a complete set of related accessories. With just a few simple steps to install you and your family, friends can enjoy the beautiful sun and comfortable temperature, not afraid of the heat, and enjoy the party.
 

Cooling principle of misting cooling system:

 
High pressure misting cooling system is the application of water to the natural climate regulation principle, using vaporization cooling method, water through the misting cooling system in a very fine misting state, fully mixed with the air, remove air impurities, accelerate the air flow, and excess positive ions in the air, increase the content of negative ions in the air. Water mist absorbs a lot of heat in the process of vaporization, so as to achieve rapid cooling effect.

This mister system is not pre-assembled. You can assemble it according to the actual size of your patio, porch, greenhouse, garden, trampoline, canopy, backyard, pergola or gazebo. T-joint misters will let your idea be realized more freely.
 

Advantages and characteristics of misting cooling system:

1. Can make the surrounding environment cool and humidify, the maximum temperature can drop 25 degrees F.
2. Easy installation, replacement and maintenance.
3. The spray covers a large area and misting droplets are very fine.
4 stainless steel nozzle than brass nozzle hardness, more durable, impact resistance, wear resistance, corrosion resistance.
5. Easy to use, cooling effect is obvious.
6. Relevant accessories are complete.
7. Save costs and water
 

Types and components of misting cooling system:

 

The types of installation pressure of misting cooling system are divided into:

High-pressure misting cooling system: The pressure of high-pressure misting cooling system is generally more than 800 - 1200 psi / 55 - 83 bar. It is configured with pressure pumps, how much pressure you need to install the area you are in, how many misting nozzles you need. Because the more misting nozzles, the greater the need for flow, the greater the pressure, the better the effect of misting system.
 
Medium pressure misting cooling system: Its pressure pump pressure range is generally between 100 - 250 psi / 7 - 17 bar. This is a commonly used cooling misting system. Because it meets the pool, courtyard of this area of misting volume demand.
 
Low pressure cooling misting system: Its pressure refers to the general less than 200psi, some direct use of household faucet pressure. It's also the type that sells well in online retail stores. Its configuration basically meets People's Daily cooling needs. This type of configuration is complete, such as pipe fittings, fasteners, nozzles, filters, filters, screws and so on. People buy it online and then install it.

 
Components of misting cooling system:

Because different scenarios have different requirements for misting cooling system. Now let's talk about the components of the misting cooling system that people commonly use.
The tubing length between faucet adapter and the first mister is 6.6FT (2m).
Then 7pcs misters are pre-assembled spacing 3.28FT (1m),the length between the first mister to the last mister is 19.67FT (6m) .
Includes 2pcs additional replacement brass nozzles + 1pcs replacement T-connector.