The reason of influencing the spray effect of high pressure mister

 
 
What are the reasons that affect the spray effect of high pressure mister?
 

1. Causes of stress

Under normal circumstances, the higher the pressure, the better the spray effect. If the spray effect is not good when we use the mister nozzle, we may wish to increase the pressure. However, it should be noted that the pressure cannot be excessive, otherwise it will cause damage to the mister nozzle itself.
 

2. Reasons for spray Angle

Many times the spray effect of the mister nozzle is not ideal, in fact, it is not caused by other reasons, but because of the Angle of the mister nozzle spray. At this time, we need to adjust the position of the mister nozzle or adjust its pressure to get the ideal spray Angle.


 

3. Traffic causes

The flow rate of the mister nozzle itself also affects the misting effect, and when we choose the mister nozzle, we need to choose the corresponding model according to our own needs. However, the mister nozzle in use for a long time, will occur wear and other conditions, this time the flow will change, the spray effect is not good, we need to replace the mister nozzle.
 

4. Temperature causes the cause

The temperature is too high or too low, will have a certain impact on the spray effect of the mister nozzle. If the temperature is too low in winter, if the liquid temperature of the spray is too low, it is easy to make the nozzle freeze and other conditions, and the spray effect is of course not ideal.


 

5. Reasons for spray coverage

Sometimes the mister nozzle is installed too low, its coverage will become small, and its spray effect will become unsatisfactory. At this time, we only need to adjust the installation height of the mister nozzle.