The adjustment method of mister nozzle misting is not good

 
The mister  sprayer is a kind of equipment widely used in agriculture, environmental protection, health and epidemic prevention and other fields, but sometimes the mister nozzle misting is not good. The spray mister nozzle misting effect is related to many factors, and the following we will introduce you to the spray mister nozzle misting is not good adjustment method.
 

First, mister nozzle size

The size of the mister nozzle has a great influence on the misting effect. If the mister nozzle is too large, the liquid particles emitted will become larger, and the misting effect is not good; If the mister nozzle is too small, the liquid is overstocked in the mister nozzle, which will also affect the misting effect. Therefore, when selecting the mister nozzle, a reasonable choice should be made according to the properties of the liquid, the spray method, the spray distance and other factors. If you find that the misting effect is not good, you can try to replace the mister nozzle of different sizes, and adjust the liquid flow rate to achieve the best misting effect.


 

Second, spray pressure

The spray pressure is also an important factor affecting the misting effect. Appropriate spray pressure can make the liquid fully dispersed, misting effect to achieve the best state. Generally speaking, the greater the pressure of the mister nozzle, the better the misting effect. However, it should be noted that the pressure should not be too large, too high pressure will lead to mister nozzle blockage and misting inequality. In actual use, appropriate adjustments can be made according to demand to maintain the appropriate spray pressure to achieve the best misting effect.
 

Third, liquid viscosity

Liquid viscosity is another important factor affecting the misting effect. If the liquid viscosity is too high, it is difficult to achieve a good misting effect. Therefore, when using the sprayer, it should be reasonably adjusted according to the size of the liquid viscosity. If the viscosity of the liquid is too high, it can be properly diluted or a larger mister nozzle can be selected to improve the misting effect.


 
Through the adjustment of the above three aspects, the bad misting of the sprayer mister nozzle can be effectively solved. At the same time, in the actual operation, we should pay attention to the cleaning and maintenance of the mister nozzle to ensure the normal use of the mister nozzle. It is hoped that the introduction of this article can help everyone better use the sprayer and improve work efficiency.