Here you can find some accessories for the nozzle. Such as atomization system nozzle replacement joints, quick plug joints, adapters, tubes, pressure pumps, extension tubes, etc. A variety of specifications and sizes of accessories. Commonly used in different types of atomization systems.

Professional misting knowledge for Misting Part

As a Misting Part factory. We manufacture and sell different types of Misting Part for misting system. High quality nozzle service. Engineers communicate directly. Engineers directly answer misting nozzle problems such as.
1. How to choose Misting Part
2. How to control the flow rate of liquid
3. How to choose the size of Misting Part
4. How to choose the Misting Part connection size
5. How to install the misting nozzle so that it will not leak, dripping
6. How to install the Misting Part for misting system stability
7. How to install the fitting of the mouth
8. How to choose the right pressure pump for Misting Part
9. How to check the leakage problem of misting nozzle system
10. How to control misting system layout. Pipe fittings layout. To achieve to achieve cooling. Humidification effect.
11. How to solve the problem that the size of the misting system is inconsistent with the interface of the accessories
12. The misting system for Misting Part does not spray. Or spray attenuation and so on
13. misting system How to detect problems in misting system pipe fittings. Installation, maintenance and other problems

Whether you are the daily use of misting system,Misting Part, or industrial needs of the misting system. We'll give you what we know about misting.
Anyway, our engineers will solve the problem of misting. Please contact us in time

Frequently Asked Questions

  • How do misting systems for Misting Part work?

    When connected to a special high-pressure pump, water is forced through our Misting Part and rapidly atomized into droplets as small as 5-10 millionths of a meter (5-10 microns). The spray system creates billions of tiny droplets that quickly evaporate. This evaporation process requires energy, which is extracted from the air as heat. To achieve a cooling effect. This is the most commonly used spray system. When placed in an enclosed area with limited air exchange, such as a factory or greenhouse, the nebulizing system will continue to increase humidity levels in the environment. Humidity levels can be as high as 90% or more. This makes the spray system ideal for humidification.

  • How is it installed?

    Tubing with Misting Part is installed on roof lines and other inconspicuous places. This can include along fences, bushes, patios and any other desired outdoor location. Choose from our wide range of tubing colors and your system will be discrete and aesthetic.

  • Will it work in high humidity?

    Yes. The cooling is more powerful in dryer areas. But even in the most humid areas, mist cooling systems can work well.

  • How many nozzles will a pump feed?

    It depends on the size of the Misting Part you are planning to use. Check our catalog for a simpel guide.

  • How do i know what size pump (gpm / Ipm) to order?

    We will help you choose the right one for Misting Part. To start with, please take a look at our website and catalog.

  • How much water will it use?

    The number and size of Misting Part are the primary factors in determining how much water your misting system will use.

  • What is the minimum inlet water pressure required?

    The minimum inlet water pressure must be 1.5 Bar. The system will operate at it`s best when the inlet water pressure is between 2.0 – 3.0 Bar. Please test the inlet water pressure prior to selecting your product. Municipal water pressure will generally be around 3.0 Bar.

  • Can the tubing be drilled?

    Yes, Stainless Steel can be drilled. Carefully measure and mark the required positions for drilling. Then use a 3 or 4mm drill bit to drill into the tubing, ensuring that you DO NOT drill right through the tubing. Clean away any debris from the drilled holes.

  • Can i install a Misting Part for misting system myself?

    Some spray systems are designed for do-it-yourself consumers. These spray systems are easy to install and typically take two to four hours to complete. Custom installation is more complex and we recommend professionals. The professional will also have network knowledge of electrical and plumbing codes to ensure that all electrical wiring and plumbing installations follow these codes without errors that may require costly correction.

  • How do i know if you are able to provide the misting system i need?

    To prevent freezing and damage, all of the misting system should be removed. The misting system line, the pump, and the filters should be drained.

Contact Us

if you have any questions

Let's get in touch

We offer high quality misting nozzles and misting systems, Answer relevant questions

  • Fast shipping
  • High quality
  • More discount
  • Engineer Online Service
  • The engineer answers your question

  • Juqi Road, Humen Town, Dongguan City,Guangdong Province, China.
  • +86 0769 85119952
  • +86 0769 85119952
  • Email:
  • Admin: Mr zhang

The contact form